Login / Sign Up My Basket (0) Tel: +44 (0) 1223 839 727

Surface Mount Intumescent Fire & Smoke Seals

From £25.83 Per Single Door Kit (Prices shown exclude VAT)
Brand: Firewise
Product Code:
Availability:
Select Required Size:
Single
Double
Available in the below colours:
White
Brown
Black
Other Quantities available and Bulk Offers:
Per Single Door Kit £25.83
Per Double Door Kit £51.13
Description
Specification
Additional Information
Product Downloads

Surface mounted intumescent door strips are supplied in single and double

door kits in black, white or brown. Panel pins are included to fix the brush at 300mm centres, fire proof paper for the locks and “Fire Door – Keep Shut signs are also supplied in the sets. Please note that our product is

supplied with a high-quality laminate finish and not just coloured duct tape

as with most of our competitor’s product. Asked for a sample today to

decide for yourself!

This product can be fitted to door frames in minutes. A 3.5mm or greater gap down the closing stile and across the door head is all that is required. Seals fit directly over hinges with no hinge bind and no special gap is necessary on hinge side.

Once fitted, the face of the seal can be painted, although the brush smoke seal must NOT be painted. If the brush is painted in error, it is easy to replace. Pins are supplied for pushing into the brush seal, although the brush has a self-adhesive strip at the back.

ES/SDS Single door sets coloured black, brown or white.

ES/DDS Double door set coloured black, brown or white.

Each set consists of a 30 x 2.5mm seal used for the top of the door frame and down the closing stile or between the meeting stiles of double action doors and a 30 x 1mm seal is then supplied for the hinge side of the door frame, applied over the hinge without causing any hinge binding.

When fire strikes, gaps around doors are a perfect escape route for the fire to travel, therefore it is crucial to halt the spread of flame and smoke by fitting Intumescent Door Seals. Intumescent surface-mounted seals offer an easy and speedy solution to this problem. Below are some of the key benefits offered by these seals:

No rebating or drilling needed.

Labour cost-saving.

Only requires a 3½mm gap at head and closing edge and 1mm at hinge edge

of the door.

Available in a range of colours and wood veneer finish.

Available in sets for single or double doors.

Can be fitted directly over hinges with no hinge binding.

An alternative version with twin rubber blades is available for larger gaps and distorted doors.

Independently tested to BS476 Part 22 (1987).

minutes of fire integrity – even with a gap of 11mm at the head of the

door.

Intumescent paper supplied for locks.

Supplied with “FIRE DOOR – KEEP SHUT” self-adhesive labels and panel pins.

Fitting these seals will greatly reduce the risk of serious injury and minimise fire damage, preventing fire and smoke from penetrating into escape routes. Firewise is your one-stop shop for passive

fire prevention products, from door upgrades to complete refurbishment and new building fire solutions.

Technical PDFs
Surface-Mount-IS.pdf
Date Added: 17/08/2017
File Type: pdf
Test Evidence
Surface-Mount-RF95130.pdf
Date Added: 17/08/2017
File Type: pdf
Description

Surface mounted intumescent door strips are supplied in single and double

door kits in black, white or brown. Panel pins are included to fix the brush at 300mm centres, fire proof paper for the locks and “Fire Door – Keep Shut signs are also supplied in the sets. Please note that our product is

supplied with a high-quality laminate finish and not just coloured duct tape

as with most of our competitor’s product. Asked for a sample today to

decide for yourself!

This product can be fitted to door frames in minutes. A 3.5mm or greater gap down the closing stile and across the door head is all that is required. Seals fit directly over hinges with no hinge bind and no special gap is necessary on hinge side.

Once fitted, the face of the seal can be painted, although the brush smoke seal must NOT be painted. If the brush is painted in error, it is easy to replace. Pins are supplied for pushing into the brush seal, although the brush has a self-adhesive strip at the back.

Specification

ES/SDS Single door sets coloured black, brown or white.

ES/DDS Double door set coloured black, brown or white.

Each set consists of a 30 x 2.5mm seal used for the top of the door frame and down the closing stile or between the meeting stiles of double action doors and a 30 x 1mm seal is then supplied for the hinge side of the door frame, applied over the hinge without causing any hinge binding.

Additional Information

When fire strikes, gaps around doors are a perfect escape route for the fire to travel, therefore it is crucial to halt the spread of flame and smoke by fitting Intumescent Door Seals. Intumescent surface-mounted seals offer an easy and speedy solution to this problem. Below are some of the key benefits offered by these seals:

No rebating or drilling needed.

Labour cost-saving.

Only requires a 3½mm gap at head and closing edge and 1mm at hinge edge

of the door.

Available in a range of colours and wood veneer finish.

Available in sets for single or double doors.

Can be fitted directly over hinges with no hinge binding.

An alternative version with twin rubber blades is available for larger gaps and distorted doors.

Independently tested to BS476 Part 22 (1987).

minutes of fire integrity – even with a gap of 11mm at the head of the

door.

Intumescent paper supplied for locks.

Supplied with “FIRE DOOR – KEEP SHUT” self-adhesive labels and panel pins.

Fitting these seals will greatly reduce the risk of serious injury and minimise fire damage, preventing fire and smoke from penetrating into escape routes. Firewise is your one-stop shop for passive

fire prevention products, from door upgrades to complete refurbishment and new building fire solutions.

Product Downloads
Surface-Mount-IS.pdf
Date Added: 17/08/2017
File Type: pdf
Surface-Mount-RF95130.pdf
Date Added: 17/08/2017
File Type: pdf

View our most popular products

Ceramic Fibre Tapes

Ceramic Fibre Tape is a specialised tape based on ceramic fibres which is supplied on single strand reels for use when glazing a...

View Product

RF1 60 Minute Glazing Kits

Lorient’s RF1™ glazing system comprises: -A pair of bead applied intumescent glazing seals (RG2704).A sodium silicate intumescent...

View Product

Handy Foam B1

FM190 (gun grade) and FM170 (hand held) are fire rated gun grade and hand held expanding polyurethane foam. They can provide up...

View Product

Contact Us

+44 (0) 1223 839 727