Login / Sign Up My Basket (0) Tel: +44 (0) 1223 839 727

Therm-A-Glaze 45 - Intumescent Seals Ltd

From £5.44 Per 2.1 metre length (Prices shown exclude VAT)
Brand:
Product Code:
Availability:
Select Required Size:
10x2mm
15x2mm
Available in the below colours:
Light Oak
Other Quantities available and Bulk Offers:
Per 2.1 metre length £5.44
Per 2.1 metre length £5.99
Description
Specification
Additional Information
Product Downloads

THERM-A-GLAZE 45 is a flexible phosphate based intumescent product giving an approximate ten fold increase in volume when exposed to heat. Its activation temperature is around 180ºC. THERM-A-GLAZE 45 is supplied in a light oak colour as standard and requires no additional surface protection because of its resistance to both atmospheric moisture and carbon dioxide. The material may be decorated with a wide range of conventional finishes if desired without impairing performance. Other colours are available to special order.

THERM-A-GLAZE 45 intumescent strip is supplied at 10mm x 2mm & 15mm x 2mm as standard. It is a dry glazing material with a self adhesive backing to allow rapid and easy installation in glazed apertures. The material can be cut with scissors or a sharp knife so is easy to fit to glazing beads. THERM-A-GLAZE 45 has been very successful as a glazing seal in 30 minutes applications for both doors and timber screens.

THERM-A-GLAZE 45 has been successfully tested as a component of various door sets and glazed screens to meet the fire resistance requirements of BS476:Part 20 & 22. It has also been certified to the more exacting requirements of Certifire. See Intumescent Seals certificate CF 284 on for details. It is currently being evaluated to the requirements of BS EN 1634-1.

THERM-A-GLAZE 45 is a low pressure intumescent strip material which has been developed for glazing applications to satisfy the demand for a dry glazing system. The degree of expansion is moderate to give more resistance to erosion which is particularly beneficial in glazing applications.

THERM-A-GLAZE 45 has been developed to provide excellent sealing properties combined with the benefit of a flexible strip of intumescent material. It is particularly useful in cases where there is a possibility of localized flaming due to combustible products since it generates fire retardant gases during expansion.

Technical PDFs
Therm-A-Glaze 45.pdf
Date Added: 17/08/2017
File Type: pdf
Certifications
CF284 Intumescent Seals.pdf
Date Added: 04/10/2017
File Type: pdf
Description

THERM-A-GLAZE 45 is a flexible phosphate based intumescent product giving an approximate ten fold increase in volume when exposed to heat. Its activation temperature is around 180ºC. THERM-A-GLAZE 45 is supplied in a light oak colour as standard and requires no additional surface protection because of its resistance to both atmospheric moisture and carbon dioxide. The material may be decorated with a wide range of conventional finishes if desired without impairing performance. Other colours are available to special order.

Specification

THERM-A-GLAZE 45 intumescent strip is supplied at 10mm x 2mm & 15mm x 2mm as standard. It is a dry glazing material with a self adhesive backing to allow rapid and easy installation in glazed apertures. The material can be cut with scissors or a sharp knife so is easy to fit to glazing beads. THERM-A-GLAZE 45 has been very successful as a glazing seal in 30 minutes applications for both doors and timber screens.

THERM-A-GLAZE 45 has been successfully tested as a component of various door sets and glazed screens to meet the fire resistance requirements of BS476:Part 20 & 22. It has also been certified to the more exacting requirements of Certifire. See Intumescent Seals certificate CF 284 on for details. It is currently being evaluated to the requirements of BS EN 1634-1.

Additional Information

THERM-A-GLAZE 45 is a low pressure intumescent strip material which has been developed for glazing applications to satisfy the demand for a dry glazing system. The degree of expansion is moderate to give more resistance to erosion which is particularly beneficial in glazing applications.

THERM-A-GLAZE 45 has been developed to provide excellent sealing properties combined with the benefit of a flexible strip of intumescent material. It is particularly useful in cases where there is a possibility of localized flaming due to combustible products since it generates fire retardant gases during expansion.

Product Downloads
Therm-A-Glaze 45.pdf
Date Added: 17/08/2017
File Type: pdf
CF284 Intumescent Seals.pdf
Date Added: 04/10/2017
File Type: pdf

View our most popular products

Ceramic Fibre Tapes

Ceramic Fibre Tape is a specialised tape based on ceramic fibres which is supplied on single strand reels for use when glazing a...

View Product

RF1 60 Minute Glazing Kits

Lorient’s RF1™ glazing system comprises: -A pair of bead applied intumescent glazing seals (RG2704).A sodium silicate intumescent...

View Product

Handy Foam B1

FM190 (gun grade) and FM170 (hand held) are fire rated gun grade and hand held expanding polyurethane foam. They can provide up...

View Product

Contact Us

+44 (0) 1223 839 727