Login / Sign Up My Basket (0) Tel: +44 (0) 1223 839 727

Firestrip 30

From £12.82 Per 15 metre coil (Prices shown exclude VAT)
Brand: Hodgson Sealants
Product Code:
Availability:
Select Required Size:
12x3mm
Available in the below colours:
White
Brown
Other Quantities available and Bulk Offers:
Per 15 metre coil £12.82
Description
Specification
Additional Information
Product Downloads

An Intumescent Strip Sealant 12mm x 3mm which can provide 30 minute resistance to the passage of fire and smoke when used to glaze a wide variety of glass types into internal doors and softwood or hardwood timber screens. It is non-toxic, can be overcoated with paints and decorative wood stains and is available in 15 metre reels, Mahogany and Off White.

The glazing material shall be Firestrip 30, 12mm wide x 3mm thick between glass and the beads. Hardwood or non-combustible material setting blocks shall be used to achieve the required edge cover.

Screens should be designed using softwood (plus Ash and Iroko) with a minimum density of 560kg/m3 and with a minimum cross section of 80mm x 45mm or hardwood (except Ash and Iroko) with a minimum density of 650kg/ m3 and with a minimum cross section of 65mm x 45mm.

Choose any type of hardwood that has a minimum density of 620kg/m3. The beads shall be a minimum 21mm x 13mm (slightly larger for Ash or Iroko) and 25mm x 25mm when used with Pyrocet. The beads shall be chamfered by 10o when used with non-insulating glasses and square or chamfered by 10o for insulating glasses. Beads shall be fixed with 1.5mm diameter x 32mm long pins or 32mm screws, skew fixed at 45o placed at a maximum of 50mm from each corner and at a maximum of 150mm centers.

Firestrip 30 is suitable for installation directly into a solid (high-density) flax board or laminated timber door leaf core. When joinery type door leaves are used, the timber for the rails and stiles shall have a density of at least 400 Kg/m3.

There are a number of alternative framing systems available, which are also suitable for use with Firestrip 30, which may not have specific test evidence. These framing systems are those listed in the CERTIFIRE Product Register as suitable for use with intumescent based glazing systems and up to the maximum sizes listed for the specific system. When the framing system is determined as suitable using this method, and the system shows sizes smaller than allowable above, the aperture sizes specified in the framing system certificate shall take precedence.

Technical PDFs
Firestrip 30.pdf
Date Added: 17/08/2017
File Type: pdf
Test Evidence
firestrip-30-test details.pdf
Date Added: 17/08/2017
File Type: pdf
Description

An Intumescent Strip Sealant 12mm x 3mm which can provide 30 minute resistance to the passage of fire and smoke when used to glaze a wide variety of glass types into internal doors and softwood or hardwood timber screens. It is non-toxic, can be overcoated with paints and decorative wood stains and is available in 15 metre reels, Mahogany and Off White.

Specification

The glazing material shall be Firestrip 30, 12mm wide x 3mm thick between glass and the beads. Hardwood or non-combustible material setting blocks shall be used to achieve the required edge cover.

Screens should be designed using softwood (plus Ash and Iroko) with a minimum density of 560kg/m3 and with a minimum cross section of 80mm x 45mm or hardwood (except Ash and Iroko) with a minimum density of 650kg/ m3 and with a minimum cross section of 65mm x 45mm.

Choose any type of hardwood that has a minimum density of 620kg/m3. The beads shall be a minimum 21mm x 13mm (slightly larger for Ash or Iroko) and 25mm x 25mm when used with Pyrocet. The beads shall be chamfered by 10o when used with non-insulating glasses and square or chamfered by 10o for insulating glasses. Beads shall be fixed with 1.5mm diameter x 32mm long pins or 32mm screws, skew fixed at 45o placed at a maximum of 50mm from each corner and at a maximum of 150mm centers.

Additional Information

Firestrip 30 is suitable for installation directly into a solid (high-density) flax board or laminated timber door leaf core. When joinery type door leaves are used, the timber for the rails and stiles shall have a density of at least 400 Kg/m3.

There are a number of alternative framing systems available, which are also suitable for use with Firestrip 30, which may not have specific test evidence. These framing systems are those listed in the CERTIFIRE Product Register as suitable for use with intumescent based glazing systems and up to the maximum sizes listed for the specific system. When the framing system is determined as suitable using this method, and the system shows sizes smaller than allowable above, the aperture sizes specified in the framing system certificate shall take precedence.

Product Downloads
Firestrip 30.pdf
Date Added: 17/08/2017
File Type: pdf
firestrip-30-test details.pdf
Date Added: 17/08/2017
File Type: pdf

View our most popular products

Ceramic Fibre Tapes

Ceramic Fibre Tape is a specialised tape based on ceramic fibres which is supplied on single strand reels for use when glazing a...

View Product

RF1 60 Minute Glazing Kits

Lorient’s RF1™ glazing system comprises: -A pair of bead applied intumescent glazing seals (RG2704).A sodium silicate intumescent...

View Product

Handy Foam B1

FM190 (gun grade) and FM170 (hand held) are fire rated gun grade and hand held expanding polyurethane foam. They can provide up...

View Product

Contact Us

+44 (0) 1223 839 727