PYROGLAZE CHANNEL
Pyroglaze® Channel is a neoprene based U shaped gasket preformed glazing seal for 30 minute fire protection, easily fitted around the periphery of fire resisting glass. It can be used to glaze apertures in fire resisting doors, screens and partitions.
Pyroglaze® Channel has been fire tested/ assessed to BS476 Pt 22 1987
providing in excess of 30 minutes fire resistance when used in conjunction with the following glasses:
Georgian Wired
Firelite®
Pyran®
Pyrobel®
Pyrobelite®
Pyroshield®
Pyroguard®
Pyrodur®
Pyrostop® |
|
INSTALLATION
Glazing rebates must be free from dirt, grit or friable materials. Pyroglaze® Channel should be cut to suit the glass size to be installed. Pyroglaze® Channel can be cut with a sharp knife or scissors. Pyroglaze® Channel should be fitted around the edges of the glass.
The first glazing bead should be fixed into position using steel pins 38mm long at 150mm centres. The glass, together with the Pyroglaze® Channel should be offered up into the opening.
The second glazing bead should be fixed into position using 38mm long steel pins at 150mm centres.
N.B. All pins must be splayed so they fit under the glass. |
|
| Pyroglaze Channel 6 |
Suitable for glasses 5mm to 7mm thick |
50m Coil |
| Pyroglaze Channel 10 |
Suitable for glasses 10mm to 12mm thick |
30m Col |
| Pyroglaze Channel 15 |
Suitable for glasses 14mm to 15mm thick |
30m Co |
Any Timber used in the construction must have a minimum density
of 650KG/M3 |
01223 839727 
